Super Safety Razors Chrome 2-Prong Heavyweight Razor and Brush Shaving Stand
$ 21.48
Elevate your grooming routine with the Super Safety Razors Chrome 2-Prong Stand. Designed to securely hold your razor and brush, its heavyweight base and sleek chrome finish add both functionality and elegance to your shaving setup.
- Description
- Brand
- Reviews (6)
Description
Product Overview
A chrome two prong stand standing 7 in tall, with a heavyweight felt lined base. It takes a razor and a brush, and the brush opening accepts knots up to 25 mm.
The felt lining is the detail worth noting: it sits between a heavy metal base and your counter, so the stand grips rather than slides and does not scratch the surface underneath. The razor prong takes cartridge razors as well as safety razors.
Key Features
- ✓ Two prongs, one for the razor and one for the brush
- ✓ Fits safety razors and Mach 3 and Fusion cartridge razors
- ✓ Brush opening takes knots up to 25 mm
- ✓ Heavyweight base with a felt lining
- ✓ Stands 7 in tall
- ✓ Chrome plated finish
What It Holds
| Razor | One razor: safety, Mach 3 or Fusion |
| Brush | One brush with a knot up to 25 mm, hung bristles down |
Fit depends on the razor and brush you own. The measurements above are the ones to check against your own kit before ordering.
Product Specifications
| Brand | Super Safety Razors |
| Type | Razor and brush stand |
| Material | Chrome plated metal |
| Finish | Chrome |
| Base | Heavyweight base with a felt lining |
| Brush knot range | Brush opening up to 25 mm |
| Condition | New |
What a Stand Does
A stand keeps the razor or brush organized and allows a rinsed brush to dry in an open, ventilated position between shaves. That is the practical job it does: everything has a place, nothing is left lying on a wet counter, and the brush sits in the open air rather than on a shelf.
Keeping the razor on the same stand gives it a place of its own as well, off the counter and out of the way rather than lying by the sink.
Who This Stand Is Best For
Takes cartridge razors as well as safety razors.
A felt lined base rather than bare metal.
The opening accepts knots up to 25 mm.
Getting the Best from Your Stand
- Rinse the brush thoroughly after the shave until the water runs clear, then shake the excess out before it goes on the stand.
- Hang the brush bristles down on the hook. That is the position the stand is designed for.
- Leave the stand somewhere air moves, rather than in a closed cabinet.
- Rinse and dry the razor before it goes back on the stand so that soap does not dry onto the metal.
A stand does not need to be dried after every use, but wiping the base occasionally stops water marks building up.
Care and Storage
Wipe the stand dry from time to time so that water marks and soap film do not build up on the finish. If soap does dry on it, warm water and a soft cloth will lift it. Do not use an abrasive cream or a scouring pad, because both will dull a plated finish permanently.
Shipping and Returns
Ships fast from Montreal, Canada. Free shipping in Canada on orders $49+.
See our Shipping Policy and Return & Refund Policy for full details.
Frequently Asked Questions
Will my razor fit this stand?
Will my brush fit this stand?
What does the felt lining do?
Does the stand come with a razor or a brush?
Why hang the brush bristles down?
Will it tip over?
Can I use it for a straight razor or a cartridge razor?
How do I clean it?
Brand
Super Safety Razors
6 reviews for Super Safety Razors Chrome 2-Prong Heavyweight Razor and Brush Shaving Stand
Only logged in customers who have purchased this product may leave a review.
You may also like
Omega S10077 S-Brush Synthetic Shaving Brush
Joe Frederick –
Looks good. Solidly built. Does what it’s supposed to. One minor drawback, after unboxing it had a very strong, very irritating chemical smell. It faded relatively quickly but it is noteworthy.
aa240sx –
Works great for any standard razor though the one pictured is Gillette. Not sure what the other side could be used for, maybe a small toothbrush.
It’s better than placing your razor on the edge of your sink, which is what I’ve been doing for years. Cleans up your sink area quite nicely.
D Mill –
I got this stand to replace the one that came with my razor. The original broke very quick. This unit has better construction and is more stable/sturdy then original. Great price!. Works as described and the finish stays shiny and clean, is not rusting like original stand. Love it.
Krausica –
Pretty straightforward; looks nice and clean, holds a good safety razor and my husband’s shaving cream brush. The chrome is a nice finish and it feels sturdy enough to last for a while, no complaints here!
Fox Workshop –
I’m happy with this. It’s cheap and seems to be well-made. It holds my Edwin Jagger brush and double edge safety razor. If you have a brush, don’t store it upright because the water will seep into the handle and destroy the bristles and glue over time. You want to hang it bristles-down. The bottom isn’t felt like another reviewer said, but a dense closed-cell foam which is better because it doesn’t absorb water as much. The plating is holding up on mine so far with no rust spots.
Kenton Cernea –
This holder holds a razor and shaving brush. The base is weighted so it won’t tip easily. Polished metal finish is very attractive. Saves space on your shelf and keeps razor and brush sanitary by not touching any surfaces.