Super Safety Razors Mission Style Wood Razor and Brush Shaving Stand

$ 14.74

SKU: WSS

Enhance your bathroom with this stylish and functional mission-style wood stand for your razor and shaving brush.

100% Authentic Products
Secure Payments (SSL • PayPal • Stripe)

Description

Product Overview

A mission style stand in solid hardwood, holding a safety razor and a shaving brush with the brush hanging bristles down.

Mission style means straight lines and visible joinery rather than curves and polish. It is the one stand in the range that reads as furniture rather than bathroom hardware, and hardwood warms up a room that is otherwise all tile and chrome.

Key Features

  • Solid hardwood, not veneer or composite
  • Mission style with straight lines and simple joinery
  • Holds a safety razor and a brush
  • Hangs the brush bristles down in the open air
  • Warmer in a bathroom than metal or plastic
  • Every stand takes the grain differently

What It Holds

RazorOne safety razor
BrushOne brush, hung bristles down

Fit depends on the razor and brush you own. The measurements above are the ones to check against your own kit before ordering.

Product Specifications

BrandSuper Safety Razors
TypeRazor and brush stand
MaterialSolid hardwood
ConditionNew

What a Stand Does

A stand keeps the razor or brush organized and allows a rinsed brush to dry in an open, ventilated position between shaves. That is the practical job it does: everything has a place, nothing is left lying on a wet counter, and the brush sits in the open air rather than on a shelf.

Keeping the razor on the same stand does a second job: it lets the head dry rather than sitting in a pool on the counter, and it keeps a sharp blade somewhere deliberate rather than loose by the sink.

Who This Stand Is Best For

Warmth in the room
Wood rather than chrome or steel.
Traditional setups
Mission styling suits a classic bathroom.
Natural material
The grain differs from one stand to the next.

Getting the Best from Your Stand

  1. Rinse the brush thoroughly after the shave until the water runs clear, then shake the excess out before it goes on the stand.
  2. Hang the brush bristles down on the hook. That is the position the stand is designed for.
  3. Leave the stand somewhere air moves, rather than in a closed cabinet.
  4. Rinse and dry the razor before it goes back on the stand so that soap does not dry onto the metal.

A stand does not need to be dried after every use, but wiping the base occasionally stops water marks building up.

Care and Storage

Wipe the stand dry rather than leaving water standing on it, because wood will lift and stain over time if it is repeatedly left wet. Warm water and a soft cloth are enough to clean it. Do not soak it and do not use an abrasive cream.

Shipping and Returns

Ships fast from Montreal, Canada. Free shipping in Canada on orders $49+.

See our Shipping Policy and Return & Refund Policy for full details.

Frequently Asked Questions

Will my razor fit this stand?
It is sized for standard double edge safety razors and most will hang on it without trouble.
Will my brush fit this stand?
Most standard brushes fit. This stand is not sold with a stated knot range, so measure across the widest point of the hair if your brush is a large one.
Will the wood be damaged by a wet brush?
Not by normal use, but wood does not like standing water. The brush hangs clear of the timber, so the drips fall rather than soak in. Wiping the stand dry occasionally and not letting a puddle sit on the base is all it needs.
Does the stand come with a razor or a brush?
No. This listing is for the stand on its own. Any razor or brush shown in the photographs is there to show scale and is not included.
Why hang the brush bristles down?
It is the position the hook is designed for, and it leaves the knot open to the air rather than resting on a surface. Many wet shavers prefer to store a brush this way between shaves. Use whichever position suits you and your brush.
Will it tip over?
Hardwood is light compared with brass or steel, so this stand relies on its footprint rather than its weight. Loaded with a razor and a brush it is stable in normal use, but it will move more easily if it is knocked than a weighted metal base would.
Can I use it for a straight razor or a cartridge razor?
It is designed around a double edge safety razor, which hangs by its head on the prong. A cartridge razor with a similar head shape will usually hang too. A straight razor or a barber razor will not, because there is no head to hook over the prong.
How do I clean it?
Wipe the stand dry rather than leaving water standing on it, because wood will lift and stain over time if it is repeatedly left wet. Warm water and a soft cloth are enough to clean it. Do not soak it and do not use an abrasive cream.

Brand

Super Safety Razors

Reviews

There are no reviews yet

Only logged in customers who have purchased this product may leave a review.

Related Products