Product Overview

The Parker 76R is a heavyweight butterfly open double edge safety razor built on a genuine brass frame and finished in graphite and chrome plating. The head opens by twisting the knob at the base of the handle, so a blade is changed without taking the razor apart.

Parker publishes a weight of 3.7 oz and a length of 4 in, which places it among the heavier razors in the Parker butterfly range.

The handle carries a deep knurled pattern along its full length, and the graphite plating gives a dark grey tone rather than the bright silver of a plain chrome finish.

Key Features

• ✓ Butterfly open twist to open head
• ✓ Genuine brass frame, graphite and chrome plated
• ✓ 3.7 oz at 4 in overall length
• ✓ Knurled full length handle
• ✓ Uses standard double edge razor blades
• ✓ One pack of five Parker double edge blades included

What Is Included

• ✓ Parker 76R butterfly open double edge safety razor
• ✓ One pack of five Parker double edge blades

Blades are supplied separately in the box and are not fitted in the razor, so load a blade before the first shave.

Product Specifications

Butterfly Open Head and Blade Changes

Butterfly open razors are also called twist to open. The head stays attached to the handle. Turning the knob at the base of the handle counterclockwise swings the two doors on top of the head apart, and turning it clockwise closes them down onto the blade.

Because the razor does not separate into parts, there is no top cap or base plate to hold while a blade is being loaded, and no small components to drop in a sink.

Who This Razor Is Best For

Weight and Shaving Feel

At 3.7 oz over 4 in the 76R carries a lot of mass for its length, so the weight of the razor does more of the work and less pressure is needed from the hand.

How a razor feels is subjective and varies from one shaver to another. Beard type, blade choice, lather and technique all affect the result, so treat these descriptions as a general guide rather than a promise about your own shave.

Getting the Best from Your Razor

1. Prepare the skin first. Many shavers find a hot shower or a warm damp towel before the shave makes a difference.
2. Build lather with a shave soap or cream. A shave brush lifts the hair and spreads the lather more evenly.
3. Let the razor do the work and apply very little pressure. Hold the head at a shallow angle to the skin rather than pressing it flat.
4. Take the first pass with the grain, then reduce further on later passes if you want to.
5. Rinse the head under running water between passes. On a butterfly razor the doors can be opened briefly to flush lather out from under the blade.
6. Change the blade once it starts to feel rough or drag. Blade life varies between individuals.

Care and Storage

Rinse the razor under warm running water after every shave and shake the water off. Open the doors from time to time and rinse under the blade so that soap does not build up in the head. Dry the razor and leave it where air can reach it rather than in a closed cabinet or a sealed travel tube.

The finish is plated. Avoid abrasive polishes, scouring pads and strong household cleaners, which can cut through a plated finish.

Keep unused blades dry and stored in their original packaging. Place used blades in a sealed Razor Blade Bank or another puncture-resistant container. Never place loose blades directly in household trash.

Shipping and Returns

Ships fast from Montreal, Canada. Free shipping in Canada on orders $49+.

See our Shipping Policy and Return & Refund Policy for full details.

Frequently Asked Questions